sorry small mistake, but the same problem.
thx robert
--w2k vpn.ebootis tool--
> conn one
> right=192.168.7.149
> left=%any
> network=auto
> auto=start
> pfs=yes
> presharedkey="secret"
>
----- Original Message -----
From: "Robert Richter" <mylists_at_subdimension.com>
To: "Freeswan List" <users_at_lists.freeswan.org>
Sent: Thursday, March 28, 2002 11:01 AM
Subject: [Users] no packet routed from eth0 to ipsec0 on freeswan box
> Hello List,
>
> i try to connect my W2k with a freeswan box and get no packet routed from
> eth0 to ipsec0 on the freeswan box. the packets from my w2k computer
arrived
> at the eth0 port 500 on the freeswanbox.
>
> can someone give me a hint please? this moment i have no ideas why this
> occurs in this way.
>
> i have compiled freeswan into the kernel. could it be that there is a
> miscompiled or not supported kernel/version?
>
> I am using freeswan 1.96 with Kernel 2.4.7-10 and x509 patch. both
computer
> are in the same subnet.
>
> my config is this one:
>
> ipsec0/rp_filter -->0
> eth0/rp_filter -->0
>
> --w2k vpn.ebootis tool--
> conn one
> left=192.168.7.149
> right=%any
> network=auto
> auto=start
> pfs=yes
> presharedkey="secret"
>
> --freeswan--ipsec.secrets--
> : PSK "secret"
>
> --freeswan--ipsec.conf--
> # /etc/ipsec.conf - FreeS/WAN IPsec configuration file
> config setup
> interfaces="ipsec0=eth0"
> klipsdebug=none
> plutodebug=all
> plutoload=%search
> plutostart=%search
> uniqueids=yes
> conn %default
> keyingtries=0
> compress=yes
> disablearrivalcheck=no
> authby=secret
> right=192.168.7.149
> pfs=yes
> auto=add
> conn roadwarrior
> left=%any
>
>
>
>
> _______________________________________________
> Users mailing list
> Users_at_lists.freeswan.org
> http://lists.freeswan.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users_at_lists.freeswan.org
http://lists.freeswan.org/mailman/listinfo/users
This archive was generated by hypermail 2.1.3 : Mon Jul 29 2002 - 05:19:47 CEST