IPv6 readyNote: This archive passes through spamassassin. Every mail marked with the subject "*****SPAM*****" has exceed a certain threshold of spam-like behaviour.

[Users] Can't ending the conection

From: Luis Jaime Gómez (etham_at_etham.com)
Date: Mon May 13 2002 - 14:22:35 CEST

Hello I triying to configure one connetion with this configuration... Please
HELP ME!!!

   LAN ------------- VPN Gateway ------- Checkpoint Firewall
172.16.0.0/24 172.16.0.176 172.16.0.1 194.106.15.178
                                                           +
                                                           |
                                                        router
194.106.15.177
                                                           |
                                                         internet
                                                           |
                                                        router ADSL
80.224.104.220
                                                           | 172.16.150.1
                                                           |
                                                        VPN Gateway
172.16.150.100(brookling)
                                                           |
                                                         LAN 172.16.150.0/24

I've this messages results

may 13 13:21:23 brookling ipsec_setup: Starting FreeS/WAN IPsec 1.97...
May 13 13:21:23 brookling kernel: klips_info:ipsec_init: KLIPS startup,
FreeS/WAN IPSec version: 1.97
May 13 13:21:24 brookling ipsec_setup: KLIPS debug `none'
May 13 13:21:24 brookling ipsec_setup: KLIPS ipsec0 on eth0
172.16.150.100/255.255.255.0 broadcast 172.16.150.255
May 13 13:21:24 brookling ipsec_setup: ...FreeS/WAN IPsec started
May 13 13:22:35 brookling ipsec__plutorun: 104 "manvi" #1: STATE_MAIN_I1:
initiate
May 13 13:22:35 brookling ipsec__plutorun: 106 "manvi" #1: STATE_MAIN_I2:
sent MI2, expecting MR2
May 13 13:22:35 brookling ipsec__plutorun: 108 "manvi" #1: STATE_MAIN_I3:
sent MI3, expecting MR3
May 13 13:22:35 brookling ipsec__plutorun: 004 "manvi" #1: STATE_MAIN_I4:
ISAKMP SA established
May 13 13:22:35 brookling ipsec__plutorun: 112 "manvi" #2: STATE_QUICK_I1:
initiate
May 13 13:22:35 brookling ipsec__plutorun: 010 "manvi" #2: STATE_QUICK_I1:
retransmission; will wait 20s for response
May 13 13:22:35 brookling ipsec__plutorun: 010 "manvi" #2: STATE_QUICK_I1:
retransmission; will wait 40s for response
May 13 13:22:35 brookling ipsec__plutorun: 031 "manvi" #2: max number of
retransmissions (2) reached STATE_QUICK_I1. No acceptable response to our
first Quick Mode message: perhaps peer likes no proposal
May 13 13:22:35 brookling ipsec__plutorun: 000 "manvi" #2: starting keying
attempt 2 of an unlimited number, but releasing whack
May 13 13:22:35 brookling ipsec__plutorun: ...could not start conn "manvi"

in both sites, is always the same...

Please, Could you help me??

_______________________________________________
Users mailing list
Users_at_lists.freeswan.org
http://lists.freeswan.org/mailman/listinfo/users

This archive was generated by hypermail 2.1.3 : Mon Jul 29 2002 - 05:19:58 CEST