('binary' encoding is not supported, stored as-is)
Hi Vasily,
If I put rightsubnet=192.168.0.43/32 only this client will connect... I
have more than 30 road warrios who connect to my vpn subnet.. :(( This is
my problem..
Do you have more than one road warrior client ?
Witch patch did you apply !??
Does anybody else have another solution !??
Thanks Vasily,
Robson
> Robson,
> This problem is still being tested. As of right now you have to
> specify
> the subnet in your ipsec.conf file as 192.168.0.56/32
> I'm applying the patch to my freeswan box and will let you know how
> things turn out, but at the time being, put rightsubet=192.168.0.43/32 in
> ipsec.conf for that connection.
>
> I hope i'm making sense.
>
>
> Regards,
> Vasiliy Boulytchev
> Colorado Information Technologies Inc.
> ----- Original Message -----
> From: <rgomes2_at_trust.com.br>
> To: <users_at_lists.freeswan.org>
> Sent: Tuesday, May 28, 2002 11:58 AM
> Subject: [Users] Problems with Subnet behind road warrior
>
>
> > Hello Guys,
> >
> > First I would like to say than you for all those peoples who help me to
> > set up my freeswan VPN.. and second (of course) I have a little
> question...
> >
> > 1 - Almost all road warrior clientes has a subnet behind them.. So,
> > almost all users has some problems to get connected on the VPN ;-))) If
> > you connect from a ISP for example, that`s all right.. I can see the
> > other subnet behind the VPN and do whatever I want.. I`m suppose to do
> > any special configuration on my ipsec.conf about that !?? Below my
> error
> > message:
> >
> > May 28 14:40:40 vpngateway Pluto[8943]: "RW_Cert_SecuredConnection"
> > 200.192.47.43 #2: cannot respond to IPsec SA request because no
> > connection is known for 10.1.2.0/24===200.192.47.4[C=BR, ST=SP, L=Sao
> > Paulo, O=Trust Consultores Associados, OU=VPN Server,
> > CN=vpngateway.trust.com.br,
> >
> E=root_at_vpngateway.trust.com.br]...200.192.47.43[E=cat_at_ig.com.br]===192.168
> > .0.43/32
> >
> > I did try to put rightsubnet=%any but I got another error message (so, I
> > turn back):
> >
> > May 28 14:35:35 vpngateway Pluto[8375]: packet from 200.192.47.43:500:
> > ignoring Vendor ID payload
> > May 28 14:35:35 vpngateway Pluto[8375]: packet from 200.192.47.43:500:
> > initial Main Mode message r
> > eceived on 200.192.47.4:500 but no connection has been authorized
> >
> >
> > Thanks for any help.
> >
> > Robson
> >
> >
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users_at_lists.freeswan.org
> > http://lists.freeswan.org/mailman/listinfo/users
> >
>
>
_______________________________________________
Users mailing list
Users_at_lists.freeswan.org
http://lists.freeswan.org/mailman/listinfo/users
This archive was generated by hypermail 2.1.3 : Mon Jul 29 2002 - 05:20:07 CEST