Exactly what it says,
you have route filtering turned on.
Regards,
Vasiliy Boulytchev
Colorado Information Technologies Inc.
----- Original Message -----
From: "Ronny Egner" <Freeswan_at_Boddenland.DE>
To: <users_at_lists.freeswan.org>
Sent: Thursday, May 30, 2002 8:20 AM
Subject: [Users] What does this error mean:
> Hi,
>
> I am using SuSE 7.2 with Freeswan 1.91_0.9.2 rel. 83.
>
> At start i get this message:
> ipsec_setup: Starting FreeS/WAN IPsec U1.91/K1.94...WARNING: ipsec0 has
> route filtering turned on, KLIPS may not work
> ipsec_setup: (/proc/sys/net/ipv4/conf/ipsec0/rp_filter = `1', should be
0)
> ipsec_setup: WARNING: eth1 has route filtering turned on, KLIPS may not
work
> ipsec_setup: (/proc/sys/net/ipv4/conf/eth1/rp_filter = `1', should be 0)
>
>
> What does that mean ?
>
> But it seems to me that the VPN is still established...
>
> May 30 16:18:27 Ribnitz-Webserver ipsec__plutorun: 104 "siv" #1:
> STATE_MAIN_I1: initiate
> May 30 16:18:27 Ribnitz-Webserver ipsec__plutorun: 106 "siv" #1:
> STATE_MAIN_I2: from STATE_MAIN_I1; sent MI2, expecting MR2
> May 30 16:18:27 Ribnitz-Webserver ipsec__plutorun: 108 "siv" #1:
> STATE_MAIN_I3: from STATE_MAIN_I2; sent MI3, expecting MR3
> May 30 16:18:27 Ribnitz-Webserver ipsec__plutorun: 004 "siv" #1:
> STATE_MAIN_I4: ISAKMP SA established
> May 30 16:18:27 Ribnitz-Webserver ipsec__plutorun: 112 "siv" #2:
> STATE_QUICK_I1: initiate
> May 30 16:18:27 Ribnitz-Webserver ipsec__plutorun: 004 "siv" #2:
> STATE_QUICK_I2: sent QI2, IPsec SA established
>
>
> Is the tunnel established ?
>
>
>
> Thanks. Ronny
>
> _______________________________________________
> Users mailing list
> Users_at_lists.freeswan.org
> http://lists.freeswan.org/mailman/listinfo/users
>
_______________________________________________
Users mailing list
Users_at_lists.freeswan.org
http://lists.freeswan.org/mailman/listinfo/users
This archive was generated by hypermail 2.1.3 : Mon Jul 29 2002 - 05:20:08 CEST