Note: This archive passes through spamassassin. Every mail marked with the subject "*****SPAM*****" has exceed a certain threshold of spam-like behaviour.

[Users] AW: Bintec Configuration

From: Tobias Leers (tol_at_k-is.de)
Date: Wed Jul 03 2002 - 14:58:10 CEST

Next message: Sam Sgro: "RE: [Users] routing problem"
Previous message: Fred Mobach: "Re: [Users] bridge+ipsec+firewall redundant network topology - help :)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Here is my configuration:

Bintec:

Advanced Settings:
Sync SAs With Local Interface : yes

Phase 1: Phase 2:
   Proposal : 2 (DES3/MD5) Proposal : 2 (ESP(DES3, MD5))
   Lifetime : 900 Sec/11000 Kb (def) Lifetime : 900 Sec/11000 Kb
(def)
   Group : 2 (1024 bit MODP) Use PFS : group 2 (1024 bit
MODP)
   Auth Meth: Pre Shared Keys
   Mode : id_protect
   Local ID : mail_at_xyz.de

FreeSWAN 1.97 with SuSE 7.3 :

++++++++++++++++++ ipsec.conf: ++++++++++++++

config setup
        interfaces=%defaultroute
        klipsdebug=none
        plutodebug=none
        plutoload=%search
        plutostart=%search
        uniqueids=yes

conn %default
keyingtries=1
authby=secret

conn xyz
        left=st.at.ic.ip
        leftnexthop=st.at.ic.nh
        leftid=st.at.ic.ip
        leftsubnet=192.168.0.0/24
        right=%any
        rightid=mail_at_xyz.de
        rightsubnet=192.168.220.0/24
        auto=add

+++++++++++++++++++ ipsec.secrets ++++++++++++

st.at.ic.ip mail_at_xyz.de : PSK "presharedsecret"

+++++++++++++++++++++++++++++++++++++++++++

Please cc to users_at_lists.freeswan.org. Please no html.

MfG
Tobias

-----Ursprüngliche Nachricht-----
Von: Daniel SOARES [mailto:dsoares_at_telebig.com]
Gesendet: Mittwoch, 3. Juli 2002 14:08
An: tol_at_k-is.de
Betreff: Bintec Configuration

            Hello Thomas,

My name is Daniel SOARES and I’m trying to connect my bintec X1200 with
a freeswan with PSK.
X1200 : Firmware 6.1

But my ping packet on a other network(virtual one) are not going to
outside in IPSEC. What could it be ?

Could you give a sample configuration, please ?

            Thanks in advance,

                           Daniel SOARES

_______________________________________________
Users mailing list
Users_at_lists.freeswan.org
http://lists.freeswan.org/mailman/listinfo/users

Next message: Sam Sgro: "RE: [Users] routing problem"
Previous message: Fred Mobach: "Re: [Users] bridge+ipsec+firewall redundant network topology - help :)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.3 : Mon Jul 29 2002 - 05:20:18 CEST