From: Aldo S. Lagana (alagana_at_discmail.com)
Date: Thu Aug 22 2002 - 20:18:39 CEST
I know that in the config document it mentions a way to allow a gateway
to gateway tunnel so that each end of the gateway can see the other.
But if you look at it, it doesn't really tell you much:
conn northgate-southgate
left=101.101.101.101
leftnexthop=101.101.101.1
right=202.202.202.202
rightnexthop=202.202.202.1
This is required if you want the two gateways to speak IPsec to each
other.
That is the same as the standard tunnel, except without the sleft and
right subnets - I have attempted this and have had problems - has
someone done this and is this the correct method?
_______________________________________________
Users mailing list
Users_at_lists.freeswan.org
http://lists.freeswan.org/mailman/listinfo/users
This archive was generated by hypermail 2.1.4 : Fri Aug 23 2002 - 01:20:13 CEST