[Users] Nat traversal problem

From: Jorge (jcastellet_at_infalsys.es)
Date: Fri Sep 13 2002 - 13:37:31 CEST


I'm trying to use it with SafeNet Client 7.0,

But I have a trouble: I can't do ping

this is de output of command ipsec look:

192.168.10.0/24 -> 192.168.1.101/32 => tun0x1002_at_A.B.C.D
esp0x684da2bc_at_A.B.C.D (0)
ipsec0->eth2 mtu=16260(1500)->1500
esp0x684da2bc_at_A.B.C.D ESP_3DES_HMAC_SHA1: dir=out
 src=W.X.Y.Z
 iv_bits=64bits
 iv=0xd607631e690d0946
 ooowin=64
 alen=160
 aklen=160
 eklen=192
 life(c,s,h)=addtime(207,0,0)
esp0xb229fcd0_at_W.X.Y.Z ESP_3DES_HMAC_SHA1: dir=in
 src=A.B.C.D
 iv_bits=64bits
 iv=0x530b37c572ee6057
 ooowin=64
 alen=160
 aklen=160
 eklen=192
 life(c,s,h)=addtime(208,0,0)
tun0x1001_at_W.X.Y.Z IPIP: dir=in src=A.B.C.D life(c,s,h)=addtime(208,0,0)
tun0x1002_at_A.B.C.D IPIP: dir=out src=W.X.Y.Z life(c,s,h)=addtime(207,0,0)
Destination Gateway Genmask Flags MSS Window irtt
Iface
0.0.0.0 W.X.Y.V 0.0.0.0 UG 0 0 0
eth2
192.168.1.101 W.X.Y.V 255.255.255.255 UGH 0 0 0
ipsec0
W.X.Y.Z 0.0.0.0 255.255.255.192 U 0 0 0
eth2
W.X.Y.Z 0.0.0.0 255.255.255.192 U 0 0 0
ipsec0

My question is :
in esp0xb229fcd0_at_W.X.Y.Z and tun0x1001_at_W.X.Y.Z src must be 192.168.1.101
instead of A.B.C.D ?

regards
JOrge

_______________________________________________
Users mailing list
Users_at_lists.freeswan.org
http://lists.freeswan.org/mailman/listinfo/users



This archive was generated by hypermail 2.1.4 : Sun Sep 15 2002 - 05:20:05 CEST