From: George Gallen (ggallen_at_slackinc.com)
Date: Mon Nov 11 2002 - 21:28:03 CET
Nov 11 15:30:50 swede1 ipsec_setup: Starting FreeS/WAN IPsec 1.98b...
Nov 11 15:30:51 swede1 ipsec_setup: Using
/lib/modules/2.4.7-10/kernel/net/ipsec
/ipsec.o
Nov 11 15:30:51 swede1 kernel: klips_info:ipsec_init: KLIPS startup,
FreeS/WAN I
PSec version: 1.98b
Nov 11 15:30:51 swede1 ipsec_setup: KLIPS debug `none'
Nov 11 15:30:53 swede1 ipsec_setup: KLIPS ipsec0 on eth1
192.168.1.200/255.255.2
55.0 broadcast 192.168.1.255
Nov 11 15:30:53 swede1 ipsec_setup: ...FreeS/WAN IPsec started
Nov 11 15:30:56 swede1 ipsec__plutorun: 022 "swede1-to-data1": we have no
ipsecN
interface for either end of this connection
Nov 11 15:30:56 swede1 ipsec__plutorun: ...could not route conn
"swede1-to-data1
"
/etc/ipsec.conf (part-of):
conn swede1-to-data1
left=1.2.3.4 (not real IP in config file)
leftnexthop=192.168.1.1
right=5.6.7.8 (not real IP in config file)
rightnexthop=192.168.0.1
auto=route
route:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
5.6.7.8 192.168.1.1 255.255.255.255 UGH 0 0 0 eth1
alfa * 255.255.255.255 UH 0 0 0 sl0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth1
192.168.1.0 * 255.255.255.0 U 0 0 0
ipsec0
10.10.155.0 * 255.255.255.0 U 0 0 0 eth0
10.10.0.0 * 255.255.0.0 U 0 0 0 sl0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
default swede1 0.0.0.0 UG 0 0 0 eth0
Now, usually, (if I want to setup a route to 5.6.7.8, I make a static route.
I get the same error (no ipsecN interface...) whether the static route
exists
or not.
Any Ideas?
Thanks
George
George Gallen
Senior Programmer/Analyst
Accounting/Data Division
ggallen_at_slackinc.com
ph:856.848.1000 Ext 220
SLACK Incorporated - An innovative information, education and management
company
http://www.slackinc.com
_______________________________________________
Users mailing list
Users_at_lists.freeswan.org
http://lists.freeswan.org/mailman/listinfo/users
This archive was generated by hypermail 2.1.5 : Wed Nov 13 2002 - 05:20:41 CET